Wire EDM, Laser Cutting & Precision Grinding — In-House

Surface grinding (flat faces, plates and die/fixture components) and centreless grinding (round shafts, guide pins, piston rods and dowel pins up to Ø40 mm). This is how we take sealing and bearing surfaces below Ra 0.4 (to Ra 0.2 on suitable parts) and hold high roundness — the finish and form that turned surfaces alone can't reach.

Flat work runs on our Okamoto ACC-52DX surface grinder — a 500 × 200 mm table with a magnetic chuck, and a maximum workpiece of 200 kg including the chuck.

Round parts go through our Palmary PC-12S centreless grinder, which grinds the outside diameter across a Ø1–40 mm range without centres — best suited to straight round parts rather than stepped or shouldered shafts.

Ra 0.8 by machining, to Ra 0.4 through precision grinding: the finer figures come from this grinding step, and they apply to the flat features and straight round parts these two machines actually suit.

Internal-bore and between-centres cylindrical grinding, deep-bore honing and hard-chrome plating remain coordinated through partners.

In-house fibre laser cutting (Bodor A3, 2 kW) for flat parts, blanks, brackets and fixture plates — quick turnaround on 2D profiles without waiting on an outside cutter.

Reliable quality-cut thickness: carbon steel to ~12 mm, stainless steel to ~6 mm (nitrogen-assisted for clean, oxide-free edges), aluminium to ~5 mm, brass/copper to ~3 mm. Send your DXF and we'll confirm cut quality and speed for your material and thickness.